Alma Comp. MK3

Compressor pedal reviews:

“If I were to publish a list of top compressor picks I’m sure the Alma Comp would hold a spot. Excellent device and now even better.” Alma Comp Mk3 review

 

Alma Comp MK3 features:

  • Superb clean sound with Passive and Active Instruments
  • Easy and simple operation
  • Low noise
  • Clean blend/ Parallel compression
  • 36v operation (internal)
  • Visual compression indicator
  • EQZ tilt control for tone sculpturing
  • 2:1/ 4:1/ 8:1 selectable compression ratio’s
  • Attack switch selects between fast and slow
  • -6db input attenuation

Voltage / Current draw

9v (+-18v internal)= 37mA
18v (+-36v internal)= 59mA

£239.00

Category: Tag:

Description

The Alma Compressor MK3, an opto-isolator compressor, is an evolution of its predecessor; it retains all the original elements and it adds a few more…

Features:
A voltage doubler (internal circuit) doubles the voltage being fed. This makes it possible to have 36v when powering from an 18v supply. The pedal can be run from 9v to 18v (max).
The higher voltage operation significantly increases the headroom and prevents unwanted clipping/distortion, caused by hotter signals.

RATIO switch: select between 2:1, 4:1 and 8:1 compression Ratios

ATK switch: select between slow and fast attacks.

-6db switch: -6db attenuation at the input

SHIFT eqz switch: select between 900Hz or 250Hz for the tilt EQ center frequency.

EQZ knob: A Tilt Equalizer, together with the SHIFT EQZ, allows to gently (and musically) compensate for different sounding instruments.

CLN knob: the Clean control, when mixed with the compressed signal, allows for parallel compression, which can help bring some of that clarity back to your playing. This acts as a Volume control for the clean signal.

COM knob: this is the compression amount. It acts, both, as the threshold and makeup gain.

VOL com knob: this is the volume for the compressed signal.

Warranty and Conditions

Any of our products will be replaced / fixed and all expenses will be covered once it has been verified that the problem isn’t a result of bad handling or negligence on the owner’s part.

If the damage is due to negligence or wrong handling, the warranty is lost and a cost can occur for the devices repair (the shipping costs will not be covered in such cases).

Let's talk about your next piece of gear

Before committing, it is important that you let us know about your instrument’s specs (electronics / number of controls, etc.), as well as where you are writing from. Give us a shout and we will get back to you.